Double row flanged cup
Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.
Features, Benefits & Information
- This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.
- Important note: For double row bearings the bore of the rear cone (marked ‘B’ track) is 0.002 to 0.004 mm larger than the ‘A’ track cone bore. This reduces the level of tight fit to facilitate adjustment of the bearing.
- H type bearings can be pre-adjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or pre-load. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.
-
100031X/100072H Double Row Flanged Cup (H type) Roller Bearing d31.75 D72 T57
-
100031X/100076XH Double Row Flanged Cup (H type) Roller Bearing d31.75 D76.2 T57
-
100031X/100080H Double Row Flanged Cup (H type) Roller Bearing d31.75 D80 T57
-
100034X/100072H Double Row Flanged Cup (H type) Roller Bearing d34.925 D72 T57
-
100034X/100076XH Double Row Flanged Cup (H type) Roller Bearing d34.925 D76.2 T57
-
100034X/100080H Double Row Flanged Cup (H type) Roller Bearing d34.925 D80 T57
-
100035/100072H Double Row Flanged Cup (H type) Roller Bearing d35 D72 T57
-
100035/100076XH Double Row Flanged Cup (H type) Roller Bearing d35 D76.2 T57
-
100035/100080H Double Row Flanged Cup (H type) Roller Bearing d35 D80 T57
-
101038X/101076H Double Row Flanged Cup (H type) Roller Bearing d38.1 D76 T57
-
101038X/101076XH Double Row Flanged Cup (H type) Roller Bearing d38.1 D76.2 T57
-
101038X/101080H Double Row Flanged Cup (H type) Roller Bearing d38.1 D80 T57