Double row plain cup
Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.
Features, Benefits & Information
- The plain outer race enables this bearing to be used in a ‘floating’ position to permit thermal expansion. As such it can replace a P type bearing when additional load capacity is required.
- G type bearings can be pre-adjusted to give GE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or pre-load. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.
- For further information contact Precision RPM.
- Important note: For double row bearings the bore of the rear cone (marked ‘B’ track) is 0.002 to 0.004 mm larger than the ‘A’ track cone bore. This reduces the level of tight fit to facilitate adjustment of the bearing.
-
100031X/100072G Double Row Plain Cup (G type) Roller Bearing d31.75 D72 T57
-
100031X/100076XG Double Row Plain Cup (G type) Roller Bearing d31.75 D76.2 T57
-
100031X/100080G Double Row Plain Cup (G type) Roller Bearing d31.75 D80 T57
-
100034X/100072G Double Row Plain Cup (G type) Roller Bearing d34.925 D72 T57
-
100034X/100076XG Double Row Plain Cup (G type) Roller Bearing d34.925 D76.2 T57
-
100034X/100080G Double Row Plain Cup (G type) Roller Bearing d34.925 D80 T57
-
100035/100072G Double Row Plain Cup (G type) Roller Bearing d35 D72 T57
-
100035/100076XG Double Row Plain Cup (G type) Roller Bearing d35 D76.2 T57
-
100035/100080G Double Row Plain Cup (G type) Roller Bearing d35 D80 T57
-
101038X/101076G Double Row Plain Cup (G type) Roller Bearing d38.1 D76 T57
-
101038X/101076XG Double Row Plain Cup (G type) Roller Bearing d38.1 D76.2 T57
-
101038X/101080G Double Row Plain Cup (G type) Roller Bearing d38.1 D80 T57