Double row flanged cup
Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.
Features, Benefits & Information
- This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.
- Important note: For double row bearings the bore of the rear cone (marked ‘B’ track) is 0.002 to 0.004 mm larger than the ‘A’ track cone bore. This reduces the level of tight fit to facilitate adjustment of the bearing.
- H type bearings can be pre-adjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or pre-load. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.
-
284234X/284355XH Double Row Flanged Cup (H type) Roller Bearing d234.95 D355.6 T166
-
300457X/300596XH Double Row Flanged Cup (H type) Roller Bearing d457.2 D596.9 T187
-
303381X/303508XH Double Row Flanged Cup (H type) Roller Bearing d381 D508 T187
-
307506/307636H Double Row Flanged Cup (H type) Roller Bearing d506 D636 T187
-
320275/320406XH Double Row Flanged Cup (H type) Roller Bearing d275 D406.4 T176
-
320280X/320406XH Double Row Flanged Cup (H type) Roller Bearing d280.194 D406.4 T176
-
323406XS/323549XSH Double Row Flanged Cup (H type) Roller Bearing d406.4 D549.275 T200
-
380330X/380482XH Double Row Flanged Cup (H type) Roller Bearing d330.2 D482.6 T200
-
382254X/382400XH Double Row Flanged Cup (H type) Roller Bearing d254 D400.05 T146
-
70030/70062H Double Row Flanged Cup (H type) Roller Bearing d30 D62 T51
-
74025/74052H Double Row Flanged Cup (H type) Roller Bearing d25 D52 T43
-
80030/80066XH Double Row Flanged Cup (H type) Roller Bearing d30 D66.675 T52