Double row flanged cup
Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.
Features, Benefits & Information
- This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.
- Important note: For double row bearings the bore of the rear cone (marked ‘B’ track) is 0.002 to 0.004 mm larger than the ‘A’ track cone bore. This reduces the level of tight fit to facilitate adjustment of the bearing.
- H type bearings can be pre-adjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or pre-load. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.
-
101040/101076H Double Row Flanged Cup (H type) Roller Bearing d40 D76 T57
-
101040/101076XH Double Row Flanged Cup (H type) Roller Bearing d40 D76.2 T57
-
101040/101080H Double Row Flanged Cup (H type) Roller Bearing d40 D80 T57
-
101041X/101076H Double Row Flanged Cup (H type) Roller Bearing d41.275 D76 T57
-
101041X/101076XH Double Row Flanged Cup (H type) Roller Bearing d41.275 D76.2 T57
-
101041X/101080H Double Row Flanged Cup (H type) Roller Bearing d41.275 D80 T57
-
102036/102072H Double Row Flanged Cup (H type) Roller Bearing d36 D72 T42
-
105115/105165H Double Row Flanged Cup (H type) Roller Bearing d115 D165 T65
-
105120/105165H Double Row Flanged Cup (H type) Roller Bearing d120 D165 T65
-
110050/110096XH Double Row Flanged Cup (H type) Roller Bearing d50 D96.838 T65
-
110050/110098XH Double Row Flanged Cup (H type) Roller Bearing d50 D98.425 T65
-
110050/110100H Double Row Flanged Cup (H type) Roller Bearing d50 D100 T65