Double row flanged cup
Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications.
Features, Benefits & Information
- This double row bearing has a flanged outer ring which locates the shaft axially. This can also simplify housing machining operations and overall design.
- Important note: For double row bearings the bore of the rear cone (marked ‘B’ track) is 0.002 to 0.004 mm larger than the ‘A’ track cone bore. This reduces the level of tight fit to facilitate adjustment of the bearing.
- H type bearings can be pre-adjusted to give HE double row bearings. This is achieved by fitting a spacer between the inner races to give the required assembly end play or pre-load. The choice of setting is based upon a number of parameters such as speed, lubrication and applied loads. Spacer width is adjusted individually prior to despatch.
-
111044X/111090H Double Row Flanged Cup (H type) Roller Bearing d44.45 D90 T64
-
111044X/111093XH Double Row Flanged Cup (H type) Roller Bearing d44.45 D93.266 T64
-
111050/111090H Double Row Flanged Cup (H type) Roller Bearing d50 D90 T64
-
111050/111093XH Double Row Flanged Cup (H type) Roller Bearing d50 D93.266 T64
-
111050X/111090H Double Row Flanged Cup (H type) Roller Bearing d50.8 D90 T64
-
112040/112085H Double Row Flanged Cup (H type) Roller Bearing d40 D85 T55
-
112041X/112085H Double Row Flanged Cup (H type) Roller Bearing d41.275 D85 T55
-
112044X/112085H Double Row Flanged Cup (H type) Roller Bearing d44.45 D85 T55
-
112045/112085H Double Row Flanged Cup (H type) Roller Bearing d45 D85 T55
-
113057X/113100H Double Row Flanged Cup (H type) Roller Bearing d57.15 D100 T58
-
113057X/113101XH Double Row Flanged Cup (H type) Roller Bearing d57.15 D101.6 T58
-
113060/113100H Double Row Flanged Cup (H type) Roller Bearing d60 D100 T58